Half-rack (9.5 inch) receiver for use with Evolution Wireless Digital handheld, bodypack and tablestand transmitters.
2 channel half rack (9.5ft)
Up to 88 MHz switching bandwidth
PoE IEEE 802.3af Class 3
Equidistant Channel Spacing: 146 channels in standard mode; 293 channels in Link Density Mode
Network enabled for control with Sennheiser Control Cockpit/media control system through a number of 3rd party modules
Clear and easy focused user interface with OLED display
Ethernet connectivity (IPv4 and IPv6)
Secure AES 256 encryption
External PSU 12V/1A
All-metal housing
Includes:
EW-DX EM 2 rack receiver
2 rod antennas
power supply with country adapters
GA 3 rackmount set
4 rubber feet
quick guide
safety guide
manufacturer declaration sheet
Rackmountable - Yes
Spec Sheet available - Yes
Operating Temperature (Maximum):
131 F
Operating Temperature (Minimum):
14 F
Wireless:
Yes
System:
•Bluetooth® Low Energy (BLE) frequency range: 2402 - 2480 MHz •Audio frequency response: 20 Hz - 20 kHz (-3 dB) at 3 dBfs •Audio THD: -60 dB for 1 kHz at -3 dBfs input level •Dynamic range: 134 dB •System latency: 1.9 ms •Relative humidity: 5 - 95 % (non-condensing)
EW-DX EM 2 (Rack Receiver) :
•Input voltage 11 - 13 V or PoE IEEE 802.3af Class 0 (CAT5e or higher) •Input current: 1 A •Transmit power (radiated): BLE: max. 10 mW EIRPAudio output power 18 dBu max. •Headphone output: 2x 70 mW at 32 OHMS •Ethernet: RJ-45 socket, IEEE802.3; 100Base-TX (half+full duplex); 10Base-T (half+full duplex) (CAT5e or higher) •Dimensions: 212 x 44 x 189 mm (8.35" x 1.73" x 7.44") •Weight: approx. 1000 g (2.2 lbs) (without antennas and power supply